Nova-Tech Leveling Base Kit (each) H40404-1000 - Manual

I N S T R U C T I O N S
940401042 01/03
Scienceware ® , is a reg. TM of Bel-Art Products
Bel-Art Products assumes no obligation or liability for any advice furnished by it, or for results obtained with respect to
these products. All such advice is given and accepted at the buyer’s risk.
OTHER FINE SCIENCEWARE ® PRODUCTS
FOR YOUR LABORATORY
For Mounting Flowmeter onto
Bench Mount
1. Remove the hex nut from the threaded inlet located at the rear
of the Flowmeter.
2. Place the mounting bracket, which is supplied with the mounting
kit, over the threaded end.
3. Replace the hex nut.
4. Remove the screw from the bottom of the bracket, line up the hole in
the bracket with the hole in the plastic triangle, and screw into place.
Catalog No. 94040-9000
Spirit Level
7"
Equilateral
Triangle Base
1"
11 ⁄
32
"
Leveling
Screws (3)
Threaded
Ends
Roto-flo ™ Flow Indicators provide a simple method for visualizing
flow in a tubing line. Brightly colored flow paddle wheels are
enclosed within clear polystyrene molded housings. When gas or
liquid flows through the system, the paddle wheel spins and
projects a solid disk of color. The paddle wheel shell is 1” (25mm)
diameter x 7/16” (11mm) thick. Overall length is 2” (51mm).
Cat. No. Fits Tubing I.D. Tube Ends Wheel Color
19937-0001 3/16” to 1/4” Straight Blue
19937-0002 3/16” to 1/4” Barbed Red
19937-0003 1/4” to 7/16” Barbed Green
ROTO-FLO ™ FLOW INDICATORS
661 Route 23 South, Wayne, NJ 07470-6814 USA
TEL: 1-800-4BEL-ART • FAX: 973-694-7199 • www.belart.com
661 Route 23 South, Wayne, NJ 07470-6814 USA
TEL: 1-800-4BEL-ART • FAX: 973-694-7199 • www.belart.com