Nova-Tech PW Series - Manual (Page 9)

Page 9 of 48
© Adam Equipment Company 2007
Before you start weighing, you have to wait for the balance to achieve a
stable internal temperature. Typical initial warm-up time suggested for a
balance already at room temperature is about 1 hour.
A stable sign ~ is shown when the balance is
stable. It will turn off if the balance is not stable.
Exact zero is shown when the “ 0 “ symbol is
on to the left of the display area.
6.0 DISPLAY
The LCD has several areas-
- A large 7 digit area to display the weight with symbols for
common weighing units on its right and symbols for zero, tare
(Net) and stability on the left.
- A 10 digit area which allows a large amount of flexibility for
displaying text messages concerning menus, operation and
errors, for example to display the current weighing mode or to
guide the user through processes such as density
determination
- A percentage indicator known as capacity tracker which is a
0-100% bar graph consisting 10 large segments for indicating
the percentage of the total balance capacity used and arrows
for check weighing.