Nova-Tech AE402 Indicator - Manual (Page 25)

23 | P a g e © Adam Equipment Company 2010
C3 PrM Printing Mode-
Manual, Continuous or
Automatic
mAn
,
Cont
(
not on EC
approved scales)
AUto
mAn
C4 Aon Enable or disable the
Accumulation AC on
AC oFF
AC on
C5 Ln Select Language EnGLi (English)
FrEnCH (French)
GErmAn (German)
SPAn (Spanish)
EnGLi
C6 UId Set User ID To be entered
manually
000000
C7 Sid Set Scale ID To be entered
manually
000000
Scale will perform the following, depending on the Accumulation and Print Settings:
A CCUMULATION
SETTINGS
PRINT SETTINGS
AC on AC Off
AUto
Accumulate and print
automatically
Print automatically,
Do not accumulate
mAn
Accumulate and Print only
when [Print/M+/Esc] key
pressed. If [Print/M+/Esc] is
pressed a second time only
print the weight. Print when [Print/M+/Esc] key is
pressed,
Do not accumulate.
Cont
Not available on
approved scales
Print continuously.
Accumulate when
[Print/M+/Esc] key is pressed
Print continuously.
Do not accumulate.
7.4 SCALE PARAMETERS
• Press [Z/T] to view the list of parameters.
• Press [Z/T] to enter a parameter. Use the [Unit/
  ] key and [Pcs/ ] key to
set the values or just the [Pcs/ ] key to select the options.
• Press [Z/T] to confirm the change and then advance to the next parameter by
pressing the [Pcs/ ] key.
• Press [Print/M+/Esc] to return to the group “FUnC 4”. If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to normal weighing.