Nova-Tech AE402 Indicator - Manual (Page 24)

22 | P a g e © Adam Equipment Company 2010
• Press [Print/M+/Esc] to return to the group “FUnC 2”. If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to weighing.
Parameter
Description Options Default
setting
P1 PCt
This parameter allows the
user to enter the Percent
weighing
Function. See
Section 6.7.
None Enabled
always
P2 AnL Enter the Animal Weighing
mode of operation, See
section 6.8 Set the filter value. Enabled
Always
7.3 RS-232 PARAMETERS
• Press [Z/T] to enter a parameter. Use the [Unit/
  ] key and [Pcs/ ] key to
set the values or just the [Pcs/ ] key to select the options.
• Press [Z/T] to confirm the change and then advance to the next parameter by
pressing the [Pcs/ ] key.
• Press [Print/M+/Esc] to return to the group “FUnC 3”. If you press
[Print/M+/Esc] again, the scale will exit the User Parameter section and
return to weighing.
This group of parameters can be set by the user for setting the RS-232 active or not,
baud rate, printing mode, accumulation mode, RS-232 language, and user or scale ID
numbers.
Parameter Description
Options Default Values
or setting
C1 on Enable or disable the
RS-232 interface Prt on
Prt oFF Prt on
C2 bd Baud Rate 600
1200
2400
4800
9600
19200
9600