Nova-Tech AE402 Indicator - Manual (Page 23)

21 | P a g e © Adam Equipment Company 2010
Parameter
Description Options Default
setting
F1 Lo Set Low limit.
Use the [Unit/   ] key
and [Pcs/ ] key to set
the values of the lower
limit.
When set press the [Z/T]
key to store the value
and go to F2 Hi
000000
F2 Hi Set High limit.
Use the [Unit/   ] key
and [Pcs/ ] key to set
the values of the high
limit.
When set press the [Z/T]
key to store the value
and go to F3 bEP
0000000
F3 bEP This parameter sets the
Beeper to off or on. If set to
on, the beeper can further
be set to sound when the
weighing result is within or
outside the check-weighing
limits.
bP oFF - Off
bP inL - Within limits
bP otL - Outside limits
(>20d)
bP inL
F4 nCK This parameter enables
negative check weighing
function with ability to do
negative tare.
on
oFF
on
7.2
PERCENT WEIGHING AND ANIMAL WEIGHING
See section 6.7 and 6.8 for details of these special weighing modes.
• Press [Z/T] to enter a parameter. Use the [Unit/
  ] key and [Pcs/ ] key to
set the values or just the [Pcs/ ] key to select the options.
• Press [Z/T] to confirm the change and then advance to the next parameter by
pressing the [Pcs/ ] key.