Avaya 4630 - Manual (Page 93)

4630/4630SW IP Telephone Options Backup/Restore Options
Issue 2.0 December 2003 8-21
Setting a User ID, Password, and other FTP (File Transfer
Protocol) Options
8
Your System Administrator establishes certain parameters for each 4630 IP
Telephone in your network. Most parameters are established at the network
server and apply to all telephones in the network. Other parameters may be
unique to a specific site, department, or group of telephones. Those settings
which may be unique to your phone appear on the FTP (File Transfer Protocol)
Setup screen. They are:
■
Server IP Address - the specific server to which your 4630 IP Telephone is
connected, for backup, restore, Corporate Directory and other
network-related functions. If your phone has been repaired, this value will
be set to zero and should be re-established.
■ Directory Path - the server location to which your telephone’s data (for
example, Speed Dial groups/lists) is sent during a backup and from which
data is restored.
■
User ID and Password - unique identifiers assigned to a phone user for
server security purposes.
The FTP Setup screen also provides access to online help for file transfer protocol
information.
1. To update any of the FTP settings, select FTP Setup from the
Backup/Restore Options and Preferences screen.
The FTP Setup Parameters screen displays.
NOTES:
• All FTP settings are set to blank upon phone manufacture and repair.
• Because FTP information may impact server operation as well as the
proper backup of your phone data, contact your System Administrator
before updating any settings.
• The User ID and Password in the procedure that follows provide access
to your server, which allows you to perform backup and other [future]
server-related features; they are not the Communication Manager regis-
tration ID and password, which identify you as an authorized user of your
respective system.