Avaya 4630 - Manual (Page 109)

Troubleshooting Troubleshooting 4630 Applications
Issue 2.0 December 2003 10-9
Power Cycling the Phone 10
Use the power cycle with your System Administrator’s approval only if the basic or
programmed reset procedure cannot be performed or does not correct the
problem:
1. Unplug the phone and plug it back in.
The phone connection is re-established.
2. If power-cycling does not correct the problem, your System Administrator
can perform a more severe power cycle routine by unplugging both the
phone and the Ethernet cables.
!
WARNING:
Because the type of power cycle mentioned in Step 2 involves
reprogramming certain values, it should only be performed by your
System Administrator.