Dings Dynamics Group 1-70 Series180TC - 250TC User Manual

Page 12

SPECIFICATIONS

Torque: 1-1/2 through 25 lb. ft.
NEMA Motor Frame Sizes: 182TC and 184TC.
Enclosure: Aluminum, with steel cover and aluminum
adaptor (through 20 lb. ft.) Cast iron, with steel cover
and cast iron adaptor (25 lb. ft. only).
Voltage: All NEMA single phase voltages and
frequencies are standard. Others optional.
Duty: Rated for continuous duty.
Mounting: Direct to NEMA C face. Horizontal or
vertical position with slight modifications.
Maximum Ambient Temperature: 40

Maximum Input Speed: 3600 rpm
Certified CSA Enclosure 2

ORDERING INFORMATION

Replacement parts can be purchased from your local
distributor or from Dings Co. at the address and
phone number shown below. Call the Dings Co. for
the location of the nearest stocking distributor.

For replacement parts, please furnish this data with
your order:

Brake model number
Part number and description (refer to parts list)
If ordering a hub, specify bore diameter and key

dimensions

If ordering electrical parts, specify voltage and

frequency

For a replacement brake, please furnish this data with
your order:

Brake model number
Voltage and frequency
Hub bore and keyway dimensions
Mounting - horizontal or vertical. If vertical, specify

whether above or below motor. If brake includes foot
mounting bracket or adapter, specify.

WARRANTY

Seller warrants products manufactured by it and
supplied hereunder to be free from defects in materials
and workmanship under normal use and proper
maintenance for a period of twelve months from date
of shipment. If within such period any such products
shall be proved to Seller’s reasonable satisfaction to
be defective, such products shall be repaired or
replaced at Seller’s option. Seller’s obligation and
Buyer’s exclusive remedy hereunder shall be limited to
such repair and replacement and shall be conditioned
upon Seller’s receiving written notice of any alleged
defect no later than 10 days after its discovery within
the warranty period and, at Seller’s option, the return
of such products to Seller, f.o.b. its factory, when such
return is feasible. Seller reserves the right to satisfy its
warranty obligation in full by reimbursing Buyer for all
payments it makes hereunder, and Buyer shall there-
upon return the products to Seller. Seller shall have
the right to remedy such defects. Seller makes no
warranty with respect to wear or use items, such as
belts, chains, sprockets, discs and coils, all of which
are sold strictly AS IS.

The foregoing warranties are exclusive and in
lieu of all other express and implied warranties
(except of title) including but not limited to implied
warranties of merchantability, fitness for a particu-
lar purpose, performance or otherwise, and in no
event shall the Seller be liable for claims (based upon
breach of express or implied warranty, negligence,
product liability, or otherwise) for any other damages,
whether direct, immediate, incidental, foreseeable,
consequential, or special.

4740 WEST ELECTRIC AVENUE MILWAUKEE, WI 53219 PHONE 414/672-7830 FAX 414/672-5354