Dings Dynamics Group 50 Series48C frame - Manual

2-50 Series Standard
Brake Instructions
Bulletin No. BK4618 (3/12)
Standard Housing Inertia
Wt. Lbs. Rotating
Model Torque Parts
Lb. Ft. Net Pkg’d WK 2 in
Lb. Ft. 2
2-51001-050 1.5 6 7 .0023
2-51003-050 3 6 7 .0023
2-51006-050 6 6 7 .0023
Table 1. List of Models
WARNING
Brake performance and features must be carefully matched
to the requirements of the application.
Consideration must be given to torque requirements,
especially where an overhauling condition exists, as well
as thermal capacity, ambient temperature, atmospheric
explosion hazards, type of enclosure and any other unusual
conditions.
Improper selection and installation of a brake and/or lack of
maintenance may cause brake failure which could result in
damage to property and/or injury to personnel.
If injury to personnel could be caused by brake failure,
additional means must be provided to insure safety of
personnel.
Do not operate manual release or energize brake coil before
installation, in order to preserve prealignment of rotating
discs for ease of installation.
Figure 2. Dimensions of Brake
4740 W. Electric Avenue Milwaukee, WI 53219 414/672-7830 FAX 414/672-5354 www. dingsco.com
IMPORTANT
Read this bulletin carefully before installing or operating
this brake. Failure to comply with these instructions
cancels all warranties.
Figure 1. 50 Series Brake