Dings Dynamics Group 60 Series End Mount NEMA 4X STAINLESS STEEL - Manual

60 Series End-Mount
Brake Instructions
NEMA 4X Stainless Steel Enclosure
Bulletin No. BK4661 (6/08)
DESCRIPTION
These magnetic disc brakes are direct acting, electromagnetically released
and spring set. They use rotating friction and stationary disc contact to
supply positive brakeing action. They mount directly onto NEMA 56C,
143TC, and 145TC frame motors, on the end opposite the drive shaft.
Models 6-60000-5141 are mounted directly to a motor where a gasket
between the brake and motor face prevents liquid media from enering the
brake.
Models 6-60000-5140 are for TEFC motors or foot mounting applications;
brake design with hub seal prevents liquid media from entering the brake
through openings in the motor fan cover or foot mounting bracket.
Models 6-60000-5141 and 6-60000-5140 are washdown NEMA 4X end-
mount series (BISSC Std. #29).
WARNING: Do not install or use these brakes in
an explosive atmosphere.
Figure 1
4740 W. Electric Avenue Milwaukee, WI 53219 414/672-7830 FAX 414/672-5354 www. dingsco.com
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference.
*Thermal capacity (HPS/MIN.) was determined under the following test conditions: a) Room temperature 72 o F. b) Stopping time of one second or less.
c) Brake mounted in a horizontal position. d) Equal on and off times. e) 1800 RPM f) Coil energized with 110% of rated voltage.
**G Length of mounting hole through bracket
NEMA 4X
No.
of
Discs
Torque
Lb.Ft.
Thermal
Capacity
HPS/MIN*
Inertia of
Rotating
Parts
Lb.Ft. 2
Dimensions
Standard with hub seal C AC G** X N
6-61001-5141 6-61001-5140 1 1.5 6 .006 4.812 .937 1.625 .875 1.531
6-61003-5141 6-61003-5140 1 3 6 .006 4.812 .937 1.625 .875 1.531
6-62006-5141 6-62006-5140 2 6 6 .011 4.812 .937 1.625 .875 1.531
6-62010-5141 6-62010-5140 2 10 6 .011 4.812 .937 1.625 .875 1.531
6-63015-5141 6-63015-5140 3 15 6 .017 5.125 1.250 1.937 1.187 1.844
6-63020-5141 6-63020-5140 3 20 6 .017 5.125 1.250 1.937 1.187 1.844
6-64025-5141 6-64025-5140 4 25 6 .022 5.437 1.562 2.250 1.343 2.000 G061033