Dings Dynamics Group 60 Series Coupler NEMA 4 - Manual

60 Series Double C
Brake Instructions
Enclosed Housing
G06
1
0
3
1
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference. When unpacking the brake, inspect it carefully
for damage that may have occurred during transit.
Bulletin No. BK4652 (9/11)
4740 WEST ELECTRIC AVENUE MILWAUKEE, WI 53219 PHONE 414/672-7830 FAX 414/672-5354 www. dingsco.com
DESCRIPTION
This 60 Series magnetic disc brake is used on 56C,
143TC and 145TC face motors and speed reducers.
The brake is direct acting, electro-magnetically released,
and spring set. It uses rotating friction and stationary
disc contact to supply positive braking action. It retains
quick release and setting capabilities at all times.
Warning: Do not install or use these brakes in an
explosive atmosphere.
* Thermal capacity (HPS/MIN.) was determined under the following test conditions: a) Room temperature 72 o F. b) Stopping time of one second or less.
c) Brake mounted in a horizontal position. d) Equal on and off times. e) 1800 RPM. f) Coil energized with 110% of rated voltage.
DIMENSIONS Figure 1
Model Number
Number of
Rotating
Discs
Torque
Lb-ft
Thermal
Capacity
HPS/Min.*
Inertia of
Rotating
Parts Lb-Ft 2
Dimensions
C AC
X
1-Piece
Shaft
2-Piece
Shaft
4-61001-5153 1 1.5 6 .006 4.937 .585 .81 .88
4-61003-5153 1 3 6 .006 4.937 .585 .81 .88
4-62006-5153 2 6 6 .010 4.937 .585 .81 .88
4-62010-5153 2 10 6 .010 4.937 .585 .81 -
4-63015-5153 3 15 6 .014 5.312 .873 1.19 -
4-63020-5153 3 20 6 .014 5.312 .873 1.19 -