Dings Dynamics Group 1-70 Series180TC - 250TC User Manual
70 series end-mount brake instructions
1-70 Series End-Mount
Brake Instructions
NEMA 2 Enclosure
Bulletin No. BK4755 (11/07)
DESCRIPTION
These magnetic disc brakes mount directly onto NEMA
182TC and 184TC frame motors, on the end opposite the
drive shaft. The brake is direct acting, electro-magnetically
released, and spring set. It uses rotating friction and
stationary disc contact to supply positive braking action. It
retains quick release and setting capabilities at all times.
WARNING: Do not install or use these brakes in an
explosive atmosphere.
Figure 1
4740 W. Electric Avenue Milwaukee, WI 53219 414/672-7830 FAX 414/672-5354 www. dingsco.com
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage! Retain instructions for future reference.
*Thermal capacity (HPS/MIN.) was determined under the following test conditions: a) Room temperature 72
o
F. b) Stopping time of one second or less.
c) Brake mounted in a horizontal position. d) Equal on and off times. e) 1800 RPM f) Coil energized with 110% of rated voltage.
Model #
Number of
Rotating
Discs
Torque
lb.ft.
Thermal
Capacity
HPS/Min.
Intertia of
Rotating
Parts
Lb-Ft
2
Dimensions
C
N
X
AC
2-71001-115
1
1.5
6
.006
4.57 1.687
.875
1.210
2-71003-115
1
3
6
.006
4.57 1.687
.875
1.210
2-72006-115
2
6
6
.010
4.57 1.687
.875
1.210
2-72010-115
2
10
6
.010
4.94 1.874 1.187 1.498
2-73015-115
3
15
6
.015
4.94 1.874 1.187 1.498
2-73020-115
3
20
6
.015
4.94 1.874 1.187 1.498
2-74025-115
4
25
6
.020
5.63 2.437 1.344 2.187
G0
708
1
0-00
1