AVerMedia Technologies AVERDIGI EB3004 MD - Manual (Page 20)

16
2.3.1 Setup the Time Stamp
Current date and time could be displayed on each channel screen by enabling TIME
STAMP function. Please follow the below steps to enable TIME STAMP.
1. Press to call out OSD menu.
2. Using ▲ and ▼ move the highlight to CAMERA/RECORD and press to
make a selection.
3. Select GENERAL and press to make a selection.
4. And then, select TIME STAMP by pressing button.
5. Using ▲ and ▼ to select the disable/enable of TIME STAMP and press or
to confirm.
GENERAL SETUP
RECORD MODE
TIME STAMP
DVR NAME
WATERMARK
PRE RECORD
AUTO RECORD
CIF
COMPANY
00 SEC
6. Press to exit from OSD menu.
7. The current date and time will display on upper right corner of each channel screen and
will be recorded.