Magnum Venus Plastech UltraMAX HVLS-1000 Series - Manual (Page 15)

HVLS-1000 Series Fluid Section Manual
Rev. 05/2012 Page | 15
Introduction:
This manual, the HVLS-1000 FLUID SECTION MANUAL, provides information you need to
perform simple maintenance and repair on your equipment.
Step-by-step assembly and disassembly procedures are included for each component.
A troubleshooting guide helps you diagnose and perform common repair situations.
A comprehensive maintenance schedule provides a detailed list for performing daily,
weekly, monthly, three-month and annual maintenance.
Please read the manual carefully. Follow the steps in the order given, otherwise you may
damage the equipment or injure yourself.
DANGER: Always wear proper safety equipment, including eye protection and gloves
when performing service and repair on this equipment.
This manual covers the following pump assemblies:
HVLS-1000
High Volume Fluid Section Assembly
HVLS-1000-DHV High Volume Fluid Section Assembly – Duo Units
HVLS-1000-HD High Volume Fluid Section Assembly – Heavy Duty
MCPA-HVLS High Volume Fluid Section Assembly – Multi Color units
HVLS-1040-CK
High Volume Fluid Section Conversion Kit – Magnapak
VPHV-0600 High Volume 6:1 Pump Assembly
VPHV-1200 High Volume 12:1 Pump Assembly
VPHV-1200-HD High Volume 12:1 Pump Assembly – Heavy Duty
During Disassembly:
As you disassemble the equipment, lay out the components in the correct order and direction.
This will help you to reassemble them.
Note: the order of the piston cup, piston cup spacer ring, piston cup backup ring and
compression ring and the directions they face. These directions are critical to proper
functioning of this equipment.