beautypg.com

Regulatory specifications – Liquid Controls LCR Install User Manual

Page 6

background image

6

Regulatory Specifications

!

!

!

!

!

IMPOR

IMPOR

IMPOR

IMPOR

IMPORT

T

T

T

TANT

ANT

ANT

ANT

ANT

For North American Installations, the installation must be fully in accordance with the National Electrical Code (US)
or the Canadian Electrical Code respectively to maintain the hazaardous location ratings on the product. This may
involve using rigid conduit for all connections.

For European installations, the installation must be fully in accordance with EN60079-14 to maintain the hazardous
location ratings on the product. This may involve using special cable gands for all connections.

Weights & Measures - Custody Transfer

United States

Canada

International

NTEP Certificate of Conformance #86-022. Complies with requirements in NIST handbooks
44 and NCWM Publication 24 for use with any approved meter.

Measurements Canada Notice of Approval #AV-2342. Complies with Weights & Measures
Acts, Regulations, Specifications, Bulletins, and Rulings/Interpretations including specifica-
tions SVM-1 and SVM-2 for use with any approved meter.

OIML R117 Report through Nederlands Meetinstituut (NHMi)

Mechanical/Climatic Suitability

Ratings

IP 66

NEMA 4X

OIML R117

Operating Temperature: -40° to 158°F (-40° to 70°C)
Relative Humidity: 0 to 100%

Dust tight, dust will not enter.
Protection against a powerful jet of water from all practical directions.

Either indoor or outdoor use to provide against falling rain, splashing water, and hose-directed
water; undamaged by the formation of ice on the enclosure; resists corrosion. Plastic lens is
resistance to UV and water immersion. Gaskets are resistant to aging.

Includes testing for Dry Heat, Cold, Damp Heat Cyclic, and Vibration (sinusoidal)

EMC

Cispr A

SVM 1

ISO 7637, EN 50081-1, EN 50081-2, EN 50082-1, and EN50082-2. Also complies with OIML
R117 for Class I
(Mobile instruments, in particular measuring systems on trucks). Self-declared CE Mark.

United States

Canada

International

Safety Approvals

Class I, Division 2, Groups C & D (non-incendive), IP66
Class I, Division 2, Groups C & D (non-incendive), IP66

United States/
Canada