Assembly/installation, Montaje/instalación – Level Mount PT900 User Manual

Page 8

www.levelmount.com

1-888-229-1459

EU: +0044 844 567 2657

UK: 0844 567 2657

Figure 6

Only use Spacer if TV has a recessed back

M4/M5/M6/M8

Bolt

M4/M5/M6/M8

Lock Washer

Washer

Flat Panel

Fixed or Tilt

Arm

Spacer

Phillips Screwdriver

Assembly/Installation

Washer

Phillips

Screwdriver

Extension Arm

M4, M5, M6 or M8

Lock Washer

M4, M5 , M6

or M8 Bolt

Spacer

Only use Spacer if Flat Panel TV

has a recessed back

Figure 4

Step 2c - Attaching Extension Arms to the Back of the TV

There are bolts of varying lengths included in this package, located in (Bags 1
through 5). Please use the bolt with the appropriate length for your TV.

Small TVs need the following hardware: (For most TVs under 50’’ or 127cm)
• Bolt M4 (Bag 1) or Bolt M5 (Bag 2)
• Lock Washer M4 (Bag 1) or Lock Washer M5 (Bag 2)
• Washer 20mm x 5.5mm x 1.0mm (Bag 5)
• An additional Washer may be needed to prevent the bolt head from

recessing into the back of the TV

• Extension

Arm

• Spacer (Bag 5) Only needed if TV has a recessed back.

Large TVs need the following hardware: (For most TVs over 50’’ or 127cm)
• Bolt M6 (Bag 3) or Bolt M8 (Bag 4)
• Lock Washer M6 (Bag 3) or Lock Washer M8 (Bag 4)
• Extension

Arm

• Spacer (Bag 5) Only needed if TV has a recessed back.

To attach the Extension Arms to the back of the TV, place the 2 bolts for each
arm through the holes of the Extension Arms and carefully thread the bolts
into the holes in the back of the TV. If there is any resistance remove the bolt
immediately and select the correctly sized bolt that enables a secure and snug
fit. Tighten the bolts snugly to the back of the TV as shown in Figure 5A or 5B.

Note: 200F/PT200 Minimum 4” (10cm) Between Arms.
400F/PT400 Minimum 6” (15cm) Between Arms.
600F/PT600 Minimum 12” (30cm) Bewtween Arms.
900F/PT900 Minimum 15.7” (40cm) Between Arms.

Caution:

Only tighten bolts until they are secure, do not over-tighten.

Figure 5A

Flat Panel

Lower

Extension Arm

Upper
Extension Arm

Fixed Arm

Figure 5B

Flat Panel

Lower

Extension Arm

Upper
Extension Arm

Tilt Arm

Step 3 – Attaching the Fixed or Tilt Arms (without Extension
Arms) to Back of the TV

There are bolts of varying lengths included in this package, located in (Bags 1
through 5). Please use the bolt with the appropriate length for your TV.

into the back of the TV

• Fixed or Tilt Arm
• Spacer (Bag 5) Only needed if the TV has a recessed back.

Large TVs need the following hardware: (For most TVs over 50’’ or 127cm)
• Bolt M6 (Bag 3) or Bolt M8 (Bag 4)
• Lock Washer M6 (Bag 3) or Lock Washer M8 (Bag 4)
• Fixed or Tilt Arm
• Spacer (Bag 5) Only needed if the TV has a recessed back.

Bolt

olt

U
Ex

Spacer

www.levelmount.com

1-888-229-1459

EU: +0044 844 567 2657

UK: 0844 567 2657

Montaje/Instalación

Paso 3 – Fijar los Brazos Fijos o Giratorios (sin Brazos
de Extensión) a la parte trasera de su televisor, con-
tinuación

Para fijar los brazos fijos o giratorios a la parte trasera de su televisor, coloque
los 2 tornillos de cada brazo en los agujeros del brazo fijo o giratorio y apriételos
con cuidado en los agujeros de la parte trasera de su televisor. Si encuentra
resistencia, saque de inmediato el tornillo y escoja otro tamaño que entre
fácilmente y permita fijar el tornillo de manera segura. Apriete bien los tornillos
a la parte trasera de su televisor, tal y como muestran las Imágenes 7A o 7B.

Nota:

200F/PT200 como mínimo 4” (10 cm) entre los brazos.

400F/PT400 como mínimo 6” (15 cm) entre los brazos.

600F/PT600 como mínimo 12” (30 cm) entre los brazos.

900F/PT900 como mínimo 15,7” (40 cm) entre los brazos.

Cuidado:

Apriete los tornillos sólo hasta que estén seguros, con
cuidado de no pasarse de rosca.

Imagen 7B

Televisor

de pantalla

plana

Tornillo

Brazo giratorio

Tornillo

Imagen 7A

Televisor

de pantalla

plana

Tornillo

Brazo fijo

Tornillo

This manual is related to the following products:

PT600 PT400 900F 600F 400F