Aiwa CDC-X237 - Manual (Page 6)

5
ENGLISH
5
ENGLISH
To
Eject a CD
Skip to the next track
Go back to the beginning
of the current track
Each extra press skips
backward one extra track
Locate a specific point in
a track
Press
z
t/g
r/f
Press and hold r/f
or t/g until you find
the point.
Labeled-side up
Track number
Elapsed playing time CD indicator
Note
• When you play a CD that is already inserted, CD play
starts at the point where it stopped the previous time.
A newly inserted CD starts from the first track.
• A CD-R or CD-RW may take some time to start playing
back, but this is not a malfunction.
• If a CD-R or CD-RW with no data is inserted, “E03” will
appear in the display. The unit cannot play such discs.
Intro Play
You can locate a desired track by monitoring the first 10
seconds of all the tracks on a CD.
1 Press INT during CD play.
“INTRO” appears on the display.
2 Press INT again when the desired track is played.
The unit returns to normal CD play.
One track Repeat Play
You can play a track repeatedly.
1 Press REP1 during CD play.
“REP1” appears on the display.
To cancel One track Repeat Play, press REP1 again.
Shuffle Play
You can play all the tracks in random order.
1 Press SHUF during CD play.
“SHUF” appears on the display.
To cancel Shuffle Play, press SHUF again.
Note
During Shuffle Play, pressing r allows you to skip
only to the beginning of the current track, not to the
previous track.
AUXILIARY EQUIPMENT
Listening to a cassette/MD/MP3 portable
player or other equipment
You can listen to equipment connected to the unit. Refer
to the operating instructions for the corresponding
equipment for more detailed information.
Be sure to remove inserted CDs to prevent possible
damage to the unit before connecting the equipment.
AUX jack Jog dial (PUSH-SOURCE)
1 Connect a cassette/MD/MP3 portable player or other
equipment to the unit’s AUX jack (3.5 mm dia.).
2 Press Jog dial (PUSH-SOURCE) repeatedly until
“AUX” appears on the display.
During AUX mode, the clock display appears.
OTHER FUNCTIONS
SEL
PS
Jog dial (PUSH-SOURCE)
Changing the key illumination color
You can choose blue or red as the key illumination color.
1 Press and hold Jog dial (PUSH-SOURCE) until
“ILL” appears on the display.
2 Turn Jog dial to select “1 (for blue)” or “2 (for red).”
Setting the dimmer of the display
1 Press and hold SEL until “D” appears in the display.
2 Turn Jog dial to select “0 (bright)” or “1 (dimmed).”
Displaying the VU level indicator
1 Turn off the unit.
2 Press and hold PS until “VU” appears in the display.
3 Turn Jog dial to selection (level indicators appear)
or off (level indicators disappear).
4 Press PS.