beautypg.com

Ef d c – Laurel Electronics LAUREATE SERIES DPM User Manual

Page 26

background image

-24-

DIGIT SELECT KEY

VALUE SELECT KEY

Press the

key to display

Hi rd (Desired meter reading
at high signal input).

Press

to display value

and select left digit. Press
again to select another digit.
Decimal point set by Dec.Pt.

Use

to set digit values

and set to 000.00 .

Press the

key. Continue to press

(or

and simultaneously) until rESEt

is displayed. The meter will now go to the operating mode and display the value of the input
signal.

13.

THERMOCOUPLES

13.1

RANGE JUMPER SELECTIONS

13.2

MENU SELECTION

Thermocouple type and Celsius or Fahrenheit scale are selected by input type. However,
Kelvin or Rankine may be displayed by entering the appropriate offset to the selected scale.
Although 0.01 degree resolution may be selected, it is not recommended for use with
thermocouples. When setting up the meter, it may be necessary to enable some of the menu
items. See Section 9 for further information.

MENU KEY

Open Thermocouple

Open TC
Indication

Jumpers Required

Upscale

c

Downscale

d

Thermocouple Type

Type

Jumpers Required

J, K, E, N

e

T, R, S

f

Figure 13.1 Temperature Signal Conditioner

e

f

d

c