Impulse 150PoE User Manual
Page 25
©Sealevel Systems, Inc.
SL9049 - 03/2011
eI/O Manual
25
Following these simple steps can eliminate most common problems.
1. Read this manual thoroughly before attempting to install the device in your system.
2. Uninstall any previous versions of the SeaMAX software before installing any new
versions.
3. Install SeaMAX software before connecting any Sealevel I/O devices. Installing
the software places the necessary files in the proper locations on your system. After
installing the software, proceed with adding the hardware.
4. Confirm that all screw terminal connections are correct and secure and that the
correct cables are being used, including network cables (crossover vs. patch cables).
5. Use the MaxSSD utility, included on the software CD, to verify proper installation.
MaxSSD is designed to simplify the installation, configuration, and diagnostics of
Sealevel SeaI/O modules.
6. Refer to the Troubleshooting Ethernet eI/O Modules section on the following page
for additional steps regarding eI/O modules.
7. If these steps do not solve your problem, please contact Sealevel Technical Support.
Our technical support is free and available from 8:00am – 5:00 pm EST, Monday
through Friday. You can contact Technical Support via email at