Impulse 150PoE User Manual
Page 23
©Sealevel Systems, Inc.
SL9049 - 03/2011
eI/O Manual
23
After the Get command is executed, the “Module Description” frame will display the model type,
description, firmware version number, interface, and I/O type. In the example shown, the
module found at slave ID 1 is an eI/O-120 module with a PoE (Modbus TCP) interface
After a successful Get operation, additional tabs may be displayed in MaxSSD, depending on the
device model found. These tabs display device I/O and allow easy configuration for all SeaMAX
supported devices.