Impulse 150PoE - Manual (Page 20)

©Sealevel Systems, Inc.
SL9049 - 03/2011
eI/O Manual 20
1. To install the driver executable from the Sealevel disk, browse the Sealevel Systems
disk for: Software\SeaMAX\Windows\SeaMAX Installer.exe
2. If you are using Windows Vista or newer operating systems, right click on the
installer executable and choose ‟Run as Administrator‟. If you are using an operating
system prior to Windows Vista, double click on the executable to launch the
Installshield and initiate the driver installation.
3. Please refer to step six above in the Disk Installation section and follow the
remaining installation steps.
1. To obtain the most current software driver package from Sealevel‟s website,
download from here:
 SeaMAX for Windows
 SeaMAX for Linux
2. Choose the link for the target operating system and click on the „Download File‟ link
to download the current driver.
3. Once downloaded, if you are using Windows Vista or newer operating systems, right
click on the installer executable and choose ‟Run as Administrator‟. If you are using
an operating system prior to Windows Vista, double click on the executable to
launch the Installshield and initiate the driver installation.
4. Please refer to step six above in the Disk Installation section and follow the
remaining installation steps.
1. Download the current SeaMAX driver using the instructions from the „Downloaded
Software Installation‟ section above. Please take note of the destination directory to
which it will save.
2. Uninstall the currently loaded driver SeaMAX driver found in the Control Panel. Prior
to Windows Vista, SeaMAX will be populated in the „Add/Remove Programs‟ list. In
Windows Vista and newer operating systems, it will be found in the „Programs and
Features‟ list.
3. Navigate to the Device Manager and remove the Sealevel digital I/O adapter by right
clicking on the line item under „SeaI/O Device‟ and choosing „Uninstall‟.