Controlled Products Systems Group RAM100 - Manual (Page 3)

www.ramsetinc.com
RESPONSIBILITIES OF INSTALLERS AND TECHNICIANS
INSTALLATION:
• READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE
ATTEMPTING ANY INSTALLATION.
• DO NOT EXCEED THE EQUIPMENT SPECIFICATIONS.
• INSURE A SAFE AND PROPER INSTALLATION.
• INSTALL THIS EQUIPMENT IN ACCORDANCE WITH THE UL 325
SPECIFICATIONS.
• MAKE SURE TO ELIMINATE ANY PINCH POINTS EXISTING ON THE
INSTALLATION. (ie. ROLLERS, ARMS…etc.)
SAFETY DEVICES:
• MAKE SURE EVERY INSTALLATION HAS A MINIMUM OF ONE NON-
CONTACT SAFETY DEVICE (SUCH AS A PHOTOELECTRIC EYE OR
LOOP DETECTOR).
• CHECK THE E.R.D. SENSITIVITY.
• MAKE SURE THAT ALL AREAS AROUND THE GATE ARE SAFE AND
SECURE. (SUCH AS THE FRONT, REAR, AND TRAVEL AREA).
COMMUNICATE WITH THE END-USER
• INSTRUCT THE END USER ON HOW TO SAFELY OPERATE ALL
FUNCTIONS OF THE OPERATOR.
• INSTRUCT THE END-USER ON HOW TO SAFELY USE THE EMER-
GENCY RELEASE.
• CLEARLY LABEL AND IDENTIFY THE CIRCUIT BREAKER FOR THE
OPERATOR.
• SHOW THE END-USER THE LOCATION OF THE CIRCUIT BREAKER
FOR THE OPERATOR.
• THOROUGHLY EXPLAIN ANY AND ALL WARRANTIES ASSOCIATED
WITH THE OPERATOR AND INSTALLATION.
• KEEP A COPY OF EACH MANUAL HANDY FOR FUTURE REFER-
ENCES.
• PROVIDE THE END-USER WITH THE "HOME OWNERS MANUAL
PACKET" (INCLUDED WITH EVERY OPERATOR).