Controlled Products Systems Group CSL24V User Manual

Page 13

SITE PREPARATION

VEHICLE LOOPS

The vehicle loops allow the gate to stay open when vehicles are obstructing the

gate path. Suggested for vehicles 14 feet (4.27 m) or longer. Vehicle loops are

not required but are recommended.

Conduit must be UL approved for low and high voltage. Consider the operator

placement BEFORE installing the pad or post.

Entrapment protection devices are required to protect against any entrapment

or safety conditions encountered in your gate application (refer to page 5 for

more details). Install warning signs on both sides of the gate.

Proper grounding gives an electrical

charge, such as from an electrical static

discharge or a near lightning strike, a

path from which to dissipate its energy

safely into the earth. Without this path,

the intense energy generated by

lightning could be directed towards the

gate operator. Although nothing can

absorb the tremendous power of a direct

lightning strike, proper grounding can

protect the gate operator in most cases.

(Inside Property)

Warning Signs

Check national and local

codes for proper depth

Concrete Pads

SAFETY

EARTH GROUND ROD

CONDUIT & CONCRETE PAD

TYPES OF INSTALLATIONS

STANDARD INSTALLATION

REAR INSTALLATION

The illustration is an example of a standard installation.

The illustration is an example of a rear installation.

(Inside Property)

Gate Rail Stop