CTI Products NCB/IM with Internal PSTN Modem - Manual (Page 51)

CTI Products, Inc. NCB/IM User Guide
Appendix F. Specifications 45
A PPENDIX F. S PECIFICATIONS
NCB/IM Unit
Power: 10 to 30 VDC, Negative Ground, Externally Current Limited
5 watts max. without SMX transceiver
10 watts max. with SMX power line transceiver
North American and International Power Supplies available
Size: 7.5" D x 5.6" W x 1.6" H
Mounting: Desktop with integral non-slip feet
Wall mount or 19" rack mount with optional adapters
Temperature: 0-60

C
Humidity: 10-95% non-condensing
Listings: UL1459, CSA C22.2, EC EN60950
Telco Approvals FCC Part 68 (U.S.), IC CS02 & CS03 (Canada),
BABT NTR2 & NTR3 (UK)
EMI: Complies with: FCC part 15 Class A
Industry Canada (IC) Class A
EN55022 (European Union) Class A
EMC: Complies with EN50082-1 (European Union)
European: Carries the CE Mark
Modem: Internal V.32 turbo 19.2 Kbps, 2 wire dial-up, 2/4 wire leased line
Simultaneous Voice plus Data.
Transceivers Supported: FTT-10A, TPT/XF-78, TPT/XF-1250, SMX, RS485, PLT22
Maximum packet size: 66 bytes (factory default router configuration)
255 bytes (maximum with software re-configuration)
Dialing: Modem Controller and Telephone Directory
SNVTs or Explicit messages
Configuration: Router set as a repeater by factory default.
Bridge, Configured, or Learning type set using standard L
ON W ORKS
network management tools capable of configuring routers.
LNS plug-in provided for configuration of telephone parameters.
Installation: Can be done with Standard Network Tools