CTI Products NCB/FL with Fiber Interface User Manual
Ncb/el™ etherlon, Ncb/fl™ fiberlon
This manual is related to the following products:
Table of contents
Document Outline
- Quick-Start Guide
- 1. Introduction
- 2. Installation
- Step 1 . Install EtherPlug Configuration Software
- Step 2. Add NCB Units to the Network Database
- Step 3. Start EtherPlug
- Step 4. Edit IP Address Parameters
- Step 5. Download IP Address Parameters to NCBs Via Serial Port
- Step 6. Physically Install NCBs into the IP Network
- Step 7. Commission the Routers and Control Neuron Processors
- Installing Additional NCB Units after Initial Installation
- 3. Network Variable (NV) Control
- 4. EtherPlug Additional Functions
- Appendix
- Index