Model numbers and specifications – CTI Products PCLTA PCI Interface User Manual
Page 33

PCLTA Installation Manual
Model Numbers and Specifications
CTI Products, Inc.
68-11199-135
29
10.
Model Numbers and Specifications
Part
Number
Description
S1-60857
MCN RCD Software w/PCLTA Module 78Kb PCI Internal Card for PC
S1-60858
MCN RCD Software w/PCLTA Module 1.25Mb PCI Internal Card for PC
• 78Kb units are for standard systems. 1.25 Mb are for custom-engineered systems.
• Since the PCLTA card has a direct network connection, it does not support dial-up control of
a remote system.
• Dial-up monitoring and control can be done with the MCN Remote Comparator Display
software, a HIB module, and a modem.
• HIB modules and PCLTA modules can be mixed in one system.
General Specifications
ISA Version
PCI Version
PC Interface:
16 Bit ISA
32 Bit PCI
Size (HxL)
in
cm
2.45x 6.10
6.22 x 15.5
3.87 x 5.20
9.8 x 13.2
PC Bracket
Full Height
Address Bytes Required
Starting Address
4
Modulo 4
16
Modulo 4
IRQs Required
1. Can use IRQ1-16.
Configuration
Software, PnP
Power Required
5V @250 mA, typical
Temperature
0-70
o
C
Humidity
25 - 90% @ 50
o
C non-condensing
MCN Network Data Rates
78K or 1.25Mb (1250K), depending upon model
Network Connector
(1) screw terminal block (2 conductor)
Max. network segment length
4000 ft. (1200 m) (78Kb);
1500 ft. (450 m) (1.25Mb)
Max PCLTA modules per
network segment:
64
(Larger, multi-segment systems can be configured.)
PC Operating System Support
(Software runs in a DOS
window)
Windows 95 / 98,
Windows NT (version 4.0 or higher), XP, 2000
Network Cabling
Category 5 UTP
Safety Approvals to:
UL 1950, CSA 1950, EN60950-1992 (CE)
Emissions Compliance:
FCC part 15, Class A, (complies with Class B)
EN55022, Class B
Software Media
CD-ROM