Pclta initialization and testing – CTI Products PCLTA PCI Interface User Manual
Page 22
PCLTA Installation Manual
PCLTA Initialization & Testing
CTI Products, Inc.
68-11199-135
18
6.
PCLTA Initialization and Testing
PCLTA initialization and testing is accomplished by using “LonWorks Plug ‘n
Play” utility. Open this utility using the following steps:
a.
From the Windows “Start” Menu, select “Settings”, then “Control Panel”.
The control panel will be displayed similar to the following.
Double-click on the “LonWorks Plug ‘n Play” icon to open this utility.
Note:
The LonWorks Plug & Play programs vary slightly depending upon what operating system you are
using. The screens you see may vary slightly from what are shown in this manual. As a rule,
follow the instructions on the screen and use the defaults unless otherwise directed in this manual.
The following “ LonWorks Plug ‘n Play” window will be displayed.
In the NI Application drop-down list, choose an image that is compatible
with MCNRCD. (For all operating systems, the Image name should end
with “L7”.) Then initialize the PCLTA by clicking the “Apply” button.
- MCN RCD System Overview (46 pages)
- MCN RCD System Planner (53 pages)
- RCD Standard - Remote Comparator Display (2 pages)
- RCD Standard - Remote Comparator Display (119 pages)
- RCD Client-Server (2 pages)
- RCD Advanced Client-Server (169 pages)
- RCD Advanced Client-Server (2 pages)
- MCN Server 8000 (3 pages)
- MCN Server 8000 (232 pages)
- EXB Network Manager (48 pages)
- HIB-IP IP Interface (2 pages)
- HIB-IP IP Interface (36 pages)
- HIB-232 Serial Interface (2 pages)
- HIB-232 Serial Interface (19 pages)
- PCLTA PCI Interface (2 pages)
- IIB Console Interface (2 pages)
- IIB Console Interface (26 pages)
- CIB Comparator Interface (2 pages)
- CIB Comparator Interface (40 pages)
- AIB AstroTAC Interface (2 pages)
- AIB AstroTAC Interface (19 pages)
- EXB-IM PSTN System Extender (4 pages)
- EXB-IP Ethernet System Extender (63 pages)
- EXB-IM PSTN System Extender (31 pages)
- GPIO General Purpose I/O Interface (3 pages)
- GPIO General Purpose I/O Interface (26 pages)
- GPIO-CVT Buffer/Logic Converter (2 pages)
- IOB I/O Interface (33 pages)
- CHIB CommandSTAR Lite Host Interface Module (22 pages)
- CCU Channel Control Unit (24 pages)
- CCU-2 Channel Control Unit (21 pages)
- RYB-8 Relay Board (2 pages)
- RYB-8 Relay Board (17 pages)
- Quad Router Panel (2 pages)
- OTAL On-the-Air Driver Assembly (22 pages)
- OTAL On-the Air Terminal Board and Lamp (14 pages)
- DC Distribution Panel (9 pages)
- TSAM Transmitter Steering & Audio Matrix (2 pages)
- TSAM Transmitter Steering & Audio Matrix (97 pages)
- TIB TSAM Interface (2 pages)
- TIB TSAM Interface (24 pages)
- TurboVUi Solo Client Software (1 page)
- TurboVUi Solo Client Software (12 pages)
- TurboVUi Solo Client Software (16 pages)