beautypg.com

CTI Products PCLTA PCI Interface User Manual

Page 16

background image

PCLTA Installation Manual

PCLTA Initialization & Testing

CTI Products, Inc.

68-11199-135

12

c.

After reviewing the Software Licensce Agreement information, click
“Yes” to continue.

d.

When prompted for the destination folder, select “Next” if the default
directory of c:\lonworks is suitable for the PC. Otherwise, select
“Browse” to specify a different directory.

e.

(This step applies to Windows 95/98 only.)
When the 16-bit Application Support prompt appears, select “Yes” to
enable the use of the 16-bit MCNRCD software with the PCLTA. This
causes the installation program to add references to the DOS config.sys
file for the “stub” device drivers named PCLON1 and PCLON2 as
follows:

device=c:\lonworks\bin\ldvstub.sys /d:pcclon1
device=c:\lonworks\bin\ldvstub.sys /d:pcclon2

f.

When the DOS Virtual-Mode Device Driver prompt appears, select “Yes”
to allow DOS applications to be used in a Windows DOS shell/window.
For Windows 95/98, this causes the installation program to add the
following reference to the DOS config.sys file:

DEVICE=C:\lonworks\bin\LDVVDD.SYS /D1