Mounting – CONTREX CX-1010 User Manual
Page 31
Page 29
MOUNTING
This section contains the mounting information for the CX–1010 Analog I/O card. Please read this section as
you mount the Analog I/O card to ensure that the Analog I/O card is mounted correctly. If the Analog I/O
card does not function properly after installation, then verify that the mounting procedure has been
completed accurately. For the specifications on the Analog I/O card, refer to CX-1010 Technical Reference
Manual, Appendices: Appendix A.
The CX-1010 will support one Analog I/O card in either of the two available slots, however, the upper slot is
preferred.
Warning
The Analog I/O Card should only be
installed by a qualified technician.
Take the proper antistatic precautions.