CNB PM1063P - Manual (Page 8)

◎ RS-485 Communication
- For PTZ control, connect this line to keyboard and DVR. To control multiple cameras at
the same time, RS-485 communication lines of them is connected in parallel as shown
below.
◎ Video Connection
- Connect with the supplied Cable.
◎ USB Connection
- Connect with the supplied Cable.
◎ UPGRADE
- Speed Dome Firmware Upgrade (Using Update Stick)
- This function is not supported now.
Cabling
RATED POWER INPUT VOLTAGE RANGE CURRENT CONSUMPTION
12V DC 11V ~ 18V DC 1A
+ -
RS-485
#1 #2 #n
Keyboard Controller /DVR
IrDA Sensor
Door Switch
Controller / DVR
POWER
Relay Output
+ -
RS-485
#1 #2 #n
Keyboard Controller /DVR
◎ Power Connection
- The standard power for the system is 12V DC/1A
Please, check the voltage and current capacity of rated power carefully.
Rated power is included in the back of main unit.
Image Output Device
PC
14 15