CNB ISS2965PW - Manual (Page 56)

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xб |С@åÇxà
56
Field Sub Field Description
Maintain
Server
Restart Restarts the system. It takes about 45 seconds.
Light Default
Resets all parameters except for TCP/IP settings.
This restore will be followes by about 45 seconds system reset.
Factory Default
Resets all parameters to Factory Default setting.
This will be followed by about 45seconds system reset.
Image/Camera
Initialization
Reset Log Deletes all Log Message.
Delete Image Deletes all Alarm Images from the internal Flash Memory.
Reboot Mecha Restart the camera mecha and Camera’s Condition parameters.
System
Upgrade
Upgrade
Use this to upgrade the system.
Select locations of upgrade file in client PC and click upgrade button.
This will be followed by one-minute system restart.
(Note) Please do not disconnect power and LAN cable from the XPEED-XNET
while the upgrade is in process. It might cause a system error.
Upgrade File can be downloaded from
http://www.cnbtec.com
BackUp Backup
This saves current configurations in client PC.
Back up file can be restored to other XPEED-XNET cameras for only network
status.
This will be followed by about 45 seconds system reset.
Restore Restore
This loads up settings from a saved Backup file.
Click restore button after selecting backup files in Client PC.
Optional check boxes can be used to select settings to be excluded
from the restore process.
- except TCP/IP parameters : Exclude TCP/IP settings.
- except Users parameters : Exclude Users settings.
- except IP Filter parameters : Exclude IP Filter setting.
This will be followed by a one-minute system reset.