CNB ISS2965PW - Manual (Page 23)

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xб |С@åÇxà
23
⊙
Pattern
• Function Pattern Function is that a camera memorizes the path (mostly curve path) by joystick of controller and preset move functions
for assigned time and revives the path exactly as it memorized.
4 Patterns are available and Maximum 1200 communication commands can be stored in a pattern.
• Setting Pattern Pattern can be created by one of following two methods.
Method 1) [Pattern NO.]
- Pattern editing screen is displayed as bellow.
- Movement by Joystick and preset movement can be
memorized in a pattern.
- The rest memory size is displayed in progress bar.
- To save the recording, press NEAR key and to cancel, press FAR key.
Method 2) Using OSD Menu : See the section “how to use OSD Menu”.
• Run Pattern
<Run Pattern> [1~4]
• Delete Pattern Use OSD menu to delete a Pattern.
⊙
Group
• Function The group function allows running sequence of Presets, Pattern and/or Swings. Max. 8 group can be stored. Each group
can have max. 20 action entities which can be preset, pattern or swing. Preset speed can be set up and the repeat number
of pattern & Swing can be set up in Group setup.
Dwell time between actions can be set up also.
• Setting Group Use OSD Menu to create a Group.
• Run Group
<Run Group> [1~8]
• Deleting Group Use OSD Menu to delete.