CNB ISS2965PW - Manual (Page 24)

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xб |С@åÇxà
24
3. Operation
⊙
Other Functions
• Power Up Action This function enables to resume the last action executed before power down. Most of actions such as Preset, Pattern,
Swing and Group are available fort his function but Jog actions are not available to resume.
• Auto Flip In case that tilt angle arrives at the top of tilt orbit(90°), the zoom module camera pans180° to keep tracing targets.
If this function is set to OFF, tilt movement range is 0~95°
• Park Action This function enables to locate the camera to specific position automatically if operator doesn’t operate the
controller for a while. The park Time can be defined as an interval from 1 minute to 4 hours.
• Alarm I/O 4 Alarm Inputs and 2 Alarm Outputs (Relay output) are used. If an external sensor is activated, camera can be set to move
to corresponding preset position. Also, the output relay can be matched to some specific preset positions to do
counteractions such as turning on the light or sounding the alarm.
It is noted that the latest alarm input is effective if multiple sensors are activated.
• Privacy Zone Mask To protect privacy, Max. 8 Privacy Masks can be created on the arbitrary position to hide objects such as windows, shops
or private house. With Spherical Coordinates system, powerful Privacy Zone Mask function is possible. This function is only
available with ISS2465N(P)X, ISS2665N(P)X, ISS2965N(P)X and ISS2765N(P)(Option).
• Global/Local
Image Setup
WB(White Balance) and AE(Auto Exposure) can be set up independently for each preset. There are 2modes, “Global” mode
& “Local” Mode. The Global mode means that WB or AE can be set up totally and simultaneously for
all presets in “ZOOM CAMERA SETUP” menu. The Local mode means that WB or AE can be set up independently or
separately for each preset in each preset setup menu.
Each Local WB/AE value should activate correspondingly when camera arrives at each preset location.
During jog operation, Global WB/AE value should be applied. All Local WB/AE value do not change although Global
WB/AE value changes.
• SemiAuto Focus This mode exchanges focus mode automatically between Manual Focus mode and Auto focus mode by operation.
Manual Focus mode activates in preset operation and Auto Focus mode activates during jog operation. With Manual
mode at preset, Focus data is memorized in each preset in advance and camera calls focus data in correspondence
with presets as soon as camera arrives at a preset.
It should shorten time to get focuses. Focus mode changes to Auto Focus mode automatically when jog operation starts.