CNB ISS2965PW - Manual (Page 26)

bâàwÉÉÜ fÑxxw WÉÅx fxÜ|xб |С@åÇxà
26
4. OSD Menu
⊙
General Rules of key Operation for Menu
• The menu items surrounded with < > always has its sub menu.
• For all menu level, to go into sub menu, press NEAR key.
• To go to up-one-level menu, press FAR key.
• To move from items to item in the menu, use Direction KEY in the Up/Down or Left/Right.
• To change a value of an item, use Up/Down of the menu direction key in the web page.
• Press NEAR key to save values and Press FAR key to cancel values.
• Specifications and functions should be different by models.
⊙ Main Menu
• SYSTEM INFORMATION
Displays system information and configuration.
• DISPLAU SETUP Enable/Disable of OSD display on Main Screen.
• DOME CAMERA SETUP Configure various functions of this camera.
• SYSTEM INITIALIZE Initializes system configuration and sets all data to
factory default configuration.
⊙
Display Setup
This menu defines Enable/Disable of OSD display on main Screen,
If an item is set to be AUTO, the item is displayed only when the value of it is
changed.
• CAMERA ID
• PTZ INFORMATION
• ACTION TITLE
• PRESET LABEL
• ALARM I/O
[ON/OFF]
[ON/OFF/AUTO]
[ON/OFF/AUTO]
[ON/OFF/AUTO]
[ON/OFF/AUTO]
■ COMPASS DIRECTION SETUP
Set North to assign compass direction as criteria.
Move camera and press NEAR button to save.