beautypg.com

Enjoy your new lights – Kolpin 97948 – HID Lights User Manual

Page 2

background image

Rev.1

Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118

www.kolpin.com

[email protected]

- Plug ballast plugs into ballast, taking care to plug in with correct polarity. They should

only go in correctly with a ramped clip retainer on one side, but they can be forced
incorrectly.

- Attach the Red to the positive on the battery and the Black to the battery or any good

ground on the chassis.

- Connect the hi/lo control wires to the bulbs. Each bulb should have a small plug with 2

wires in it. Connect the bulbs to the plugs in the wire harness that match. Each bulb
should have 3 connection, positive, negative and hi/lo control.

- Secure everything with zip ties and make sure ballast are securely mounted.


Enjoy your new lights!!