beautypg.com

Installation – Kolpin 53550 - Stealth Exhaust 2.0 User Manual

Page 5

background image

Rev. 2

INSTALLATION





Drill 1/8” Holes

Mark Holes

Enlarge holes with 3/16” pin punch such as one
shown. This rolls metal inside to make screws grip
better.

Glue gasket in place with HI-TEMP silicone and
apply silicone to all surfaces and screw holes

Bolt adapter in place. For direct installation –
muffler will slide directly over this adapter. Use
1 3/8” muffler clamp.

To use elbow adapter, slide #59 bushing onto the
outlet as shown. This make it 1 ½” O.D. needed
for use with elbow. Use sealant.