Kolpin 21541_21542 – KXP Ratcheting Rhino Grip - Manual (Page 2)

Rev. 1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118 www.kolpin.com [email protected]
21542 Parts List:
Item Description Quantity
1 Ratcheting Rhino Grip 2
2 KXP Ratcheting Base 2
3 Kwik Clip 2
4 Nylon Washer 2
5 Large Rubber Expander 2
6 Plastic Spacer 2
7 Small Rubber Expander* 2
8 Threaded Rod 2
21542 Assembly:
1. Place the smaller rubber expander on the
threaded rod.
* NOTE: the rubber expander for both
systems has a counter-bored relief that
mates to the threaded rod. Please be sure
to install correctly!
2. Slide the plastic spacer onto the threaded
rod.
3. Slide the larger rubber expander onto the
rod.
4. Place the nylon washer on top of the large
rubber expander and thread the rod into
the threaded insert in the bottom of the
base.
5. Place the expander in the Lock & Ride hole
on the bed rail and twist the base clockwise.
As you twist the threaded rod will compress
the rubber expanders and secure the grip to
your Polaris Ranger.
6. Place the Ratcheting Rhino Grip into the
base, orient the grip as desired and secure
with the Kwik Clip.
7. To remove, simply turn the base counter
clockwise and remove from the bed rail.
6
7
5
3
1
2
4
4
Kolpin now offers many accessory options for Polaris ATV and UTV models. For a complete listing of these KXP
accessories and Kolpin’s KXP Plungers that are compatible with Polaris® Lock & Ride® System, be sure to check
out www.kolpin.com , as new items will be coming soon.