Kolpin 89495 – KXP UTV Fuel Pack Bracket User Manual
Kxp utv fuel pack bracket
Rev. 1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
89495
–
KXP UTV Fuel Pack Bracket
Fuel Pack Not Included
Parts List:
89495 Assembly:
1. Attach the Bracket Plate to the Base Plate using the (4) 5/16" Carriage bolts, (4) flat washers and (4)
5/16” Nylon nuts. Tighten loosely until final positioning is completed when the bracket is on the
machine.
2.
Now, insert the Molded Tank Bracket through the Bracket Plate as shown above in the illustration
,
attach using the
(4) ¼” x 3/4” Truss Head Bolts, (4) ¼” Nylon Nuts, and the (4) ¼” Washers, making
sure the Nylock Nuts on the back side of the molded tank bracket. Tighten securely.
3. Thread in the T-Knob to the Molded Tank Bracket.
4. Insert the KXP Plunger through the hole in the center of the base plate. Place the plastic washer
over the threads and thread on the KXP Handle. Set the bracket on the UTV rail at your preferred
location.
5. Make sure the bracket is flat on the rail and tighten the KXP plunger securely.
Tank Attachment:
1. Turn the T-Knob so it is in the vertical position.
2.
Slide on the Fuel Pack Jr.
3. Twist the T-Knob to the vertical position until you hear it snap. It is important that the handle sits
horizontally on the tank to keep the handle from backing off during use.
Item Description
Quantity
1
Mounting Base Plate
1
2
Bracket Plate
1
3
Molded Tank Bracket
1
4
KXP Plunger
1
5
¼” x ¾” Truss Head Bolt
4
6
¼” Washers
4
7
¼” - 20 Nylock Nut
4
8
5/16” Carriage Bolt
4
9
5/16” Washer
4
10
5/16” Nylon Nut
4
11
T-Knob
1
4
2
3
5
11
1
Kolpin now offers many accessory options for Polaris ATV and UTV models. For a complete listing of these KXP
accessories and Kolpin’s KXP Plungers that are compatible with Polaris® Lock & Ride® System, be sure to check
ou
as new items will be coming soon.