INTELLINET NETWORK NSC15-WG User Manual User Manual
Page 95
- 95 -
URL:
The basic script URL goes here. Note: You need to enter the
URL without any leading http://.
Port:
Standard HTTP requests are made on port 80, but if your
application requires a different port, you can define it here.
User ID:
If the script URL is password protected, you need to enter a
valid User ID in this field.
Password:
Enter the password here if the script URL requires
authentication.
Proxy Server:
The proxy server parameters are all optional and only need
to be used in case the camera cannot directly connect to
the script URL, but only via a proxy server.
Camera -> Advance -> HTTP Event -> Alarm Sending:
This manual is related to the following products: