INTELLINET NETWORK NSC15-WG User Manual User Manual
Page 77
- 77 -
Passphrase:
Enter the password for your wireless network here. Repeat
the password in the field below.
The wireless interface has its own IP settings. These are independent from the
regular settings (Network -> Information) and must be configured separately.
Obtain an IP address automatically (DHCP):
Enable this and the camera will obtain the IP information from
the DHCP server in your network.
Use the following IP address:
If you activate this option, you need to enter the IP-related
values (IP address, subnet mask, default gateway) in the
corresponding fields below.
Use the following DNS server address:
If you enter the IP settings manually, you also need to key in
proper DNS server information. The primary DNS server is
mandatory. The secondary DNS server is used as a backup.
Note: Do not set up the Network interfaces (LAN and WLAN) with the same
static IP address.