INTELLINET NETWORK NSC15-WG User Manual User Manual
Page 83
- 83 -
Camera -> Security -> IP Filter (only certain models):
The IP filter allows blocking or access to the camera based on the IP address of
the connecting client. This is an additional layer of security, which helps to limit
access to the camera in security-sensitive environments.
IP Filter:
Activate this function by setting this option to On.
Allow range:
This defines which IP address is allowed to have access to the
camera. Enter the start IP address and end IP Address and
click on Add to add the IP range to the list of allowed IP
addresses.
Allow Range List: All allowed IP addresses are listed here. To remove an entry,
select it from the drop-down list and click Delete.
Deny range:
Enter IP addresses here that are not allowed to access the
camera.
Deny Range List: All denied IP addresses are listed here. To remove an entry,
select it from the drop-down list and click Delete.