INSTEON Load Controller 220V / 240V 30 Amp, N/O and N/C (2477SA1, 2477SA2) Manual - Manual (Page 3)

240V Load Controller Owner’s Manual
Page 3 of 14
ABOUT 240V LOAD CONTROLLER
240V Load Controller lets you efficiently control the use of heavy-duty appliances to save energy and cut
down on utility costs. Remotely control your appliances that run on higher voltages, up to 30 Amps
(resistive loads only).
Key 240V Load Controller Features
• After installation, setup is easy – installs and links to other INSTEON devices in minutes
• Controls high-voltage appliances up to 240 Volts, 30 Amps, split-single phase (resistive loads only)
• Communicates simultaneously over both radio frequency (RF) and the power line
• Acts as an access point for RF-only devices
• Indicates INSTEON setup mode activity and operational states with a Load Active LED, dual-color
Status LED and beeper
• Does not require a Neutral connection
• Set button functions as an On/Off toggle switch for the attached load
• Stores setup state in non-volatile memory so settings aren’t lost during power outages
• Two-year warranty
Set button
Status LED
Load Active LED