INSTEON SwitchLinc Relay (Dual-Band) (2477S) Manual - Manual (Page 15)

Page 15 of 18 2477S - Rev: 1/21/2014 7:27 AM
Mounting Standard, single gang wall box
Wires
Line, Load, Ground – 12 AWG
Neutral – 18 AWG
Wires
Black – Line (Hot)
White – Neutral
Red – Load
Bare Copper - Ground
Color White (color change kits available)
Set button Clear
Air Gap Set button (when pulled out)
Plastic UV Stabilized Polycarbonate
Beeper Yes
Setup LED 1 Dual-Color (green and red)
Status LEDs 2 white, can be dimmed or disabled (color change kits available)
Dimensions 4.1" H x 1.78" W x 1.47" D
Weight 120 grams / 0.26 pounds
Operating Environment Indoors
Operating Temperature Range 32 °F - 104 ° F (0 ° - 40 ° C)
Operating Humidity Range 0-90% relative humidity, non-condensing
Storage conditions 4F to +158F (-20 – 70 degrees Celsius)
Electrical
Voltage 100-277VAC +/- 10%
Frequency 50/60Hz Auto Detected at power-up
Maximum Load
17 Amp resistive capacity (100-277VAC)
1,800 Watt incandescent capacity (100-277VAC)
1 HP motors (at 120VAC only)
10 Amps Ballast (100-277VAC)
Surge Resistance Up to 500 VAC
Retains all settings without power Yes, all saved in Non-volatile EEPROM
Standby power consumption < 1 watt
Safety Approved ETL (Intertek Testing Services)
Certifications FCC, IC Canada