Hach-Lange POLYMETRON 9245 User Manual - Manual (Page 121)

119
Section 14 Material Safety Data Sheets (MSDS)
14.1 Diisopropylamine (DIPA)
1. IDENTIFICATION OF THE SUBSTANCE
Catalogue No: 803646
Product name: diisopropylamine for synthesis
2. COMPOSITION / INFORMATION ON INGREDIENTS
CAS no: 108-18-9
Molecular weight: 101.19
Chemical formula: C
6
H
15
N
EC index no: 612-048-00-5
EINECS number: 203-558-5
3. HAZARDS IDENTIFICATION
Highly flammable. Irritating to eyes, respiratory system and skin.
4. FIRST AID MEASURES
After skin contact: wash off with plenty of water. Remove contaminated clothing.
After eye contact: rinse out with plenty of water for at least 10 minutes with the eyelid held wide open. Summon eye specialist.
After inhalation: fresh air.
If swallowed: give plenty of water to drink, induce vomiting. Summon doctor.
5. FIRE FIGHTING MEASURES
Suitable extinguishing media: water, CO
2
, foam, powder
Special risks: combustible. Vapors heavier than air. Formation of explosive mixtures possible with air.
Keep away from sources of ignition. The following may develop in event of fire: NO.
6. MEASURES IN CASE OF ACCIDENTAL SPILLAGE
Soak up with a liquid absorbent, e.g. Chemizorb® or Rhonesec®. Clean contaminated area.
7. HANDLING AND STORAGE
Handling: no further requirements.
Storage: store tightly closed, cool, dry, protected from air. Take measures to prevent electrostatic charging.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Personal protective equipment:
•
respiratory protection: required when vapors/aerosols are generated. Filter K (acc. to DIN 3181) for NH
3
• eye protection: required
• hand protection: required
• industrial hygiene: change contaminated clothing. Application of skin-protective barrier cream recommended. Wash hands
after working with substance.