Hach-Lange POLYMETRON 9245 User Manual - Manual (Page 110)

108
Spare Parts and Accessories
11.2 Spare parts - In contact with sample
11.3 Spare parts - In contact with cell or electrodes
Table 14 Spare parts - In contact with sample
Description Part Number
Cleaning brush for static heat exchanger system 09240=A=9840
Tubing silicone
ø
12x17 mm (per meter) – from 924x column to drain 359110,52012
Set of tools for disconnecting in and out sampling tubes on 924x quick fittings 578=507=602
Quick fitting for
ø
6mm external diameter (O.D.) tubing 578=601=703
Quick fitting for
ø
8mm external diameter (O.D.) tubing 578=602=703
Tubing in PTFE,
ø
2x6 mm (per meter) 590=060=026
In-Line filter for tubing 4mm I.D; body made of PP 595=000=002
Sampling solenoid valve, 3/2way, NPS 0.8 (0.2 - 6 bars)
For connector, see P/N 09240=A=9172
For mounting, special torx screw driver at P/N 820=000=006 689=132=008
Solenoid valve on over-flow vessel, 3/2 ways (also called conditioning valve)
For connector, see P/N 09240=A=9171
For mounting, special torx screw driver at P/N 820=000=006 689=132=024
Pump 24VDC, membrane, 0.1L/mn, for 924x-flush pump 695=004=004
Table 15 Spare parts - In contact with cell or electrodes
Description Part Number
Electrolyte reservoir for 9245-9240 complete (includes mounting and tubing) 09240=A=0700
Conductivity sensor for 9245-9240
For tightening, see seal P/N 429=120=030
For mounting, see threaded sleeves P/N 359015,20035) 09240=C=0256
Reference electrode for 9245-9240 sodium analyzer 09240=C=0310
Sodium glass electrode for 9245-9240 sodium analyzer 09240=C=0320
Threaded sleeve PG13.5 359015,20035
Reference electrolyte KCl 3M, 500 ml 363140,00500
O-Ring 12x3mm, EPDM 429=120=030
Cap in PE for 6mm
ø
hole - Like gas canal of 9245-9240 measurement cell. 431=210=006
Cap in PE for 20mm
ø
hole - Like first well of 9245-9240 measurement cell 431=210=020
Flask PolyEthylene 1L with anti-drop spout 490=001=040
Silicone tubing
ø
6x8 mm (per meter) 590=160=080