ADTRAN DUAL Nx56/64 1200142L1# - Manual (Page 31)

Chapter 3. Operation
61200054L2-1 Nx56/64 (EIA-530) Option Module User Manual 3-9
To display the port name and the software version in-
stalled, as shown in Figure 3-5, do the following:
1. Use the Scroll keys to move through the available
ports, or enter the port number with the number key.
2. When the desired port name is displayed, press
Enter .
3. Press Cancel to exit or to select another port.
Figure 3-5. Port Name and Software Version Display
2)RUN SELF-TEST, Submenu of 4)Test
This menu item is used to execute both the internal test of
the TSU 100 and of the Nx56/64 (EIA-530) option mod-
ule. This is the same test executed during power-up. The
results of the self-test are shown on the TSU 100 display.
For additional information on self-test, see Chapter 3, Op-
eration in the TSU 100 User Manual.
To activate a self-test, do the following:
1. Follow the standard operating procedure to access
the
4)TEST menu items.
2. With the cursor on 2)RUN SELF-TEST , press Enter .
The TSU 100 display will show the test outcome.