ADTRAN DUAL Nx56/64 1200142L1# - Manual (Page 29)

Chapter 3. Operation
61200054L2-1 Nx56/64 (EIA-530) Option Module User Manual 3-7
8)0 INHIB
The Nx interface detects an uninterrupted string of 0s
being transmitted toward the network. If
0 S are transmit-
ted for more than one second, the TSU 100 forces 1 S
towards the network.
Choices: On or Off
Table 3-1 shows the conditions which cause the port con-
trol signal to be deactivated.
3)FACTORY RESTORE, Submenu of 3)UTIL
This selection is used to restore the factory default set-
tings for all pass through option module parameters.
Operation
To return the unit to the opening main menu with all the
factory default settings restored, do the following:
1. Follow the standard operating procedure to access
the
3)UTIL menu items.
2. With the cursor on 3)FACT RESTORE , press Enter .
Table 3-1. Normal Mode Operation
SIGNAL RTS V.54
LOOPBACK
511 TEST
ON
SELF-TEST
ACTIVE
NETWORK
TEST ACTIVE
NO DS0
MAPPED
NETWORK
ALARM
CTS Follows Off Off Off Off Off Off
DCD - - - Off - Off Off
DSR - Off Off Off Off Off -
- = Do not care
Force On = On under all conditions