7)port config, submenu of 2)config -5, Operation -5, 1)interface -5 – ADTRAN DUAL Nx56/64 1200142L1# User Manual
Page 27: Figure 3-3. port configuration submenu -5, 7)port config, submenu of 2)config
Chapter 3. Operation
61200054L2-1
Nx56/64 (EIA-530) Option Module User Manual
3-5
7)PORT CONFIG, Submenu of 2)CONFIG
The
7)PORT CONFIG
submenu is used for configuration
of the Nx56/64 (EIA-530) option module.
Operation
To display Figure 3-3 on the TSU 100, place the cursor on
menu item
2)CONFIG
and perform the following steps:
1.
Press
Enter
or the number
2
key. This displays the
first two Configuration submenu items. The cursor
will be on
1)NETWORK (NI)
.
2.
Use the
Scroll Down
key to place the cursor on
7)PORT CONFIG
and press
Enter
.
3.
Use the scroll keys to identify
1.1 N
X
56/64
. Only the
bottom line of the display changes.
Figure 3-3. Port Configuration Submenu
To select
P
ORT
C
ONFIGURATION
, press
Enter
. This displays
the first of eight submenu items. They are:
1)INTERFACE
This selects the active interface for the Base Nx port. The
Nx ports, which are installed as option modules, have
only one type of interface.
Choice: EIA-530