ADTRAN DUAL Nx56/64 1200142L1# - Manual (Page 24)

Chapter 3. Operation
3-2 Nx56/64 (EIA-530) Option Module User Manual 61200054L2-1
Figure 3-1. TSU 100 Main Menu Tree
Nx56/64 Menus Are All Submenus
The Nx56/64 menus are accessed from and operated the
same as menus for the TSU 100. As shown in the bold,
italicized menu items in Figure 3-1, the Nx56/64 items are
submenu choices of the four main menus. Each of the
Nx56/64 submenu items is discussed in the following
paragraphs. All are accessed by using the same method.
OPERATION OF NX56/64 SUBMENUS
With the cursor on one of the four Main menu choices,
press
Enter or the number key. The first two submenu
items with the cursor on the first item will display. Use
the
S CROLL D OWN key to place the cursor on the desired
item; then press Enter . This displays the first two sub-
menu choices.
1) NI PERF REPORTS
1)STATUS 2) NI ERRORS
3) ACTIVE ALARMS
1) NETWORK (NI) 4) VIEW HISTORY
2) CONFIG 2) UNIT 5) PORT STATUS
3) MAP XCHNG
4) MAP IN USE A (B)
TSU 100 5) DS0 MAP A 1) TIME/DATE
MAIN MENU 6) DS0 MAP B 2) FACTORY RESTORE
7) PORT CONFIG 3) SET PASSCODE
4) UNIT ID
3) UTIL 5) PORT UTIL
6) SOFTWARE REV
1) NETWORK TESTS 7) ENET ADDRESS
4) TEST 2) RUN SELF-TEST 8) SERIAL NUMBER
3) PORT TEST
4) CANCEL TEST