Clear-Com FreeSpeak Beltpack - Manual (Page 47)

Clear-Com Communication Systems
Eclipse Wireless Communication System
2 - 1 3
• This facility allows the user to select a level at which the audio is
gated to prevent background noise being transmitted. Use the left
and right scroll buttons to set the microphone level by moving the
slider. The level can be set from 0 (off) to 14 is steps of 1.
• Press button C to select the level setting and return to the previous
menu or use the scroll buttons to select Exit and press button C to
exit.
Release 5.1 includes a mic profile which cuts the bass by 12 dB and
boosts the treble by + 3 dB. This is permanently set for all modes.
The MkII beltpacks include a hardware mic gate and in release 5.1 this
has been activated on Mic noise gate level 1 to allow a very low
whisper on the beltpacks.
SET FACTORY DEFAULTS
To reset the beltpack to the factory defaults go to the main
programming menu and select Set Factory Defaults.
The factory defaults options are NO to cancel the operation or YES to
default all the user settable parameters such as limiters and levels to
the factory settings.
Select NO to cancel or use the scroll buttons to select YES to reset.
.